The Centriforce V2 Heavy Cut Polishing Pad (Red) is built for intense paint correction, removing deep defects, heavy swirls, and sanding marks with speed and control. Engineered with an innovative conical center hole, this pad delivers superior cooling and polish distribution, ensuring consistent results even under demanding conditions. Whether you’re correcting hard clear coats or performing aggressive cutting, this pad offers unmatched durability and performance.

Key Features & Benefits

🔹 Enhanced Cooling Design – The conical center hole increases airflow during machine operation, reducing heat and friction for longer pad life
🔹 Aggressive Cut for Defect Removal – Ideal for removing heavy oxidation, scratches, and sanding marks before refining with a finishing pad
🔹 Efficient Polish Distribution – Centrifugal force redistributes polish evenly across the pad for consistent results and reduced product waste
🔹 Built for Durability – High-density foam construction resists tearing and compression during extended polishing sessions

How to Use

Step 1: Center the Centriforce V2 Heavy Cut Pad on your backing plate
Step 2: Apply 3–4 dime-sized drops of compound or heavy-cut polish
Step 3: Spread the product at low speed, then increase to cutting speed with moderate pressure
Step 4: Work a 2' x 2' area using overlapping passes until desired correction is achieved
Step 5: Wipe clean with a quality microfiber towel before moving on to the next section
Pro Tip: Follow up with a Medium or Soft Cut pad for enhanced clarity and gloss. Clean the pad frequently to maintain cutting performance and avoid pad saturation.

Dilution Ratios

Not applicable – Polishing pad

Why We Love It (From the CSW Team)

“At Car Supplies Warehouse, we love the Centriforce V2 Heavy Cut Pad for its powerful correction capabilities and smart design. The built-in cooling hole keeps temperatures in check—even on tough clear coats—so we get consistent results without overheating or pad failure. It’s a beast for heavy compounding, and we always keep it on hand for major correction work.”

Compatible With / Works Best With

✅– Maximum correction power when paired with the Heavy Cut pad
✅ – Keeps foam clean between passes for optimal performance
✅ – Perfect follow-up for refining after heavy correction

Frequently Asked Questions (FAQs)

❓ Is the Heavy Cut Pad safe for all paint types?
💡 Yes, but it’s best suited for hard or heavily damaged paint. Always test in an inconspicuous area before widespread use.

❓ Can I use this pad with a DA or rotary polisher?
💡 Absolutely. The Centriforce V2 pads are compatible with both dual-action and rotary machines.

❓ How often should I clean the pad during use?
💡 Clean the pad after every 1–2 panels with compressed air or a pad brush to maintain cutting efficiency and prevent micro-marring.

Technical Specifications

📏 Pad Size Options: Typically available in 5.5” and 6.5” diameters
🧴 Foam Type: Heavy Cut (Red) – Firm open-cell structure
💨 Center Design: Conical hole for ventilation and even polish flow
🛠 Material: High-performance foam with hook-and-loop backing
🚗 Application Type: Machine use – DA or rotary