Product Details
＋
CarPro ClearCut provides exceptional cut in very little time whilst creating a minimal amount of dust!
While the cut is extraordinary, the finish is also quite impressive! With the capability of removing scratches as deep as P1000, ClearCut is the perfect tool for a 2-step job on any paint or even 1-step on medium-hard paint.
Features:
- Saves time
- Zero Fillers
- Low dusting
- Removes P1000 grit and up
- Body shop safe
- Compatible with both Dual Action and Rotary machine
- Compatible with a variety of foam, microfiber, and wool pads
Directions:
1. Prime (clean dry pad) with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
2. Spread product across a section
3. Raise speed to HIGH speed with LOW pressure
4. Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
5. Increase pressure with each pass, finishing down with heavier pressure
6. When scratches are gone or polish has been worked through, wipe clean with a microfiber towel
7. Clean Pad
8. Move to next section, Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
2. Spread product across a section
3. Raise speed to HIGH speed with LOW pressure
4. Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
5. Increase pressure with each pass, finishing down with heavier pressure
6. When scratches are gone or polish has been worked through, wipe clean with a microfiber towel
7. Clean Pad
8. Move to next section, Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
Detailing Tips:
- If needed, follow with .
- If coating the vehicle with , we recommend for finishing
